Setup Accura OCR

To initialize sdk on app start:

RecogEngine recogEngine = new RecogEngine();
RecogEngine.SDKModel sdkModel = recogEngine.initEngine(your activity context);

if (sdkModel.i > 0) { // if license is valid

     if (sdkModel.isMRZEnable) // RecogType.MRZ

     if (sdkModel.isBankCardEnable)  // RecogType.BANKCARD
     
     if (sdkModel.isAllBarcodeEnable) // RecogType.BARCODE

    // sdkModel.isOCREnable is true then get card list which you are selected on creating license
    if (sdkModel.isOCREnable) List<ContryModel> modelList = recogEngine.getCardList(MainActivity.this);
    if (modelList != null) { // if country & card added in license
        ContryModel contryModel = modelList.get(selected country position);
        contryModel.getCountry_id(); // getting country id
        CardModel model = contryModel.getCards().get(0/*selected card position*/); // getting card
        model.getCard_id() // getting card id
        model.getCard_name()  // getting card name

        if (cardModel.getCard_type() == 1) {
            // RecogType.PDF417
        } else if (cardModel.getCard_type() == 2) {
            // RecogType.DL_PLATE
        } else {
            // RecogType.OCR
        }
    }
}

---

Optional: Load License File Dynamically

If you prefer to place the license file dynamically, you can use the following method. This allows you to specify the license file path at runtime. For a demo of dynamic licensing, please refer to the dynamic_license_demo branch.

RecogEngine.SDKModel sdkModel = recogEngine.initEngine(activity, "your license filepath");

---

Update filters like below.

Call this function after initialize sdk if license is valid(sdkModel.i > 0)

• Set Blur Percentage to allow blur on document

  //0 for clean document and 100 for Blurry document
  recogEngine.setBlurPercentage(Context context, int /*blurPercentage*/50);

• Set Face blur Percentage to allow blur on detected Face

  // 0 for clean face and 100 for Blurry face
  recogEngine.setFaceBlurPercentage(Context context, int /*faceBlurPercentage*/50);

• Set Glare Percentage to detect Glare on document

  // Set min and max percentage for glare
  recogEngine.setGlarePercentage(Context context, int /*minPercentage*/6, int /*maxPercentage*/98);

• Set Hologram detection to verify the hologram on the face

  // true to check hologram on face
  recogEngine.SetHologramDetection(Context context, boolean /*isDetectHologram*/true);

• Set light tolerance to detect light on document

  // 0 for full dark document and 100 for full bright document
  recogEngine.setLowLightTolerance(Context context, int /*tolerance*/30);

• Set motion threshold to detect motion on camera document

    // 1 - allows 1% motion on document and
    // 100 - it can not detect motion and allow document to scan.
    recogEngine.setMotionThreshold(Context context, int /*motionThreshold*/18);

---

Set CameraView

Must have to extend com.accurascan.ocr.mrz.motiondetection.SensorsActivity to your activity.
- Make sure your activity orientation locked from Manifest. Because auto rotate not support.

private CameraView cameraView;

@Override
public void onCreate(Bundle savedInstanceState) {
    if (isPortrait) {
        setRequestedOrientation(ActivityInfo.SCREEN_ORIENTATION_PORTRAIT); // to set portarait mode
    } else {
        setRequestedOrientation(ActivityInfo.SCREEN_ORIENTATION_LANDSCAPE); // to set landscape mode
    }
    super.onCreate(savedInstanceState);
    setTheme(R.style.AppThemeNoActionBar);
    setContentView(R.layout.your layout);

    // Recog type selection base on your license data
    // As like RecogType.OCR, RecogType.MRZ, RecogType.PDF417, RecogType.DL_PLATE, RecogType.BANKCARD
    RecogType recogType = RecogType.OCR;
    cardId = CardModel.getCard_id();
    cardName = CardModel.getCard_name();
    countryId = ContryModel.getCountry_id();

    // initialized camera
    initCamera();
}

private void initCamera() {
    //<editor-fold desc="To get status bar height">
    Rect rectangle = new Rect();
    Window window = getWindow();
    window.getDecorView().getWindowVisibleDisplayFrame(rectangle);
    int statusBarTop = rectangle.top;
    int contentViewTop = window.findViewById(Window.ID_ANDROID_CONTENT).getTop();
    int statusBarHeight = contentViewTop - statusBarTop;
    //</editor-fold>

    RelativeLayout linearLayout = findViewById(R.id.ocr_root); // layout width and height is match_parent

    cameraView = new CameraView(this);
    if (recogType == RecogType.OCR || recogType == RecogType.DL_PLATE) {
        // must have to set data for RecogType.OCR and RecogType.DL_PLATE
        cameraView.setCountryId(countryId).setCardId(cardId)
        		.setMinFrameForValidate(3/*minFrame*/); // Set min frame for qatar ID card for Most validated data. minFrame supports only odd numbers like 3,5...
    } else if (recogType == RecogType.PDF417) {
        // must have to set data RecogType.PDF417
        cameraView.setCountryId(countryId);
    }
    if (recogType == RecogType.MRZ) {
        // Also set MRZ document type to scan specific MRZ document
        // 1. ALL MRZ document       - MRZDocumentType.NONE        
        // 2. Passport MRZ document  - MRZDocumentType.PASSPORT_MRZ
        // 3. ID card MRZ document   - MRZDocumentType.ID_CARD_MRZ 
        // 4. Visa MRZ document      - MRZDocumentType.VISA_MRZ    
        cameraView.setMRZDocumentType(mrzDocumentType);
        
        // Pass 'all' for accepting MRZs of all countries
        // or you can pass respective country codes of countries whose MRZ you want to accept. Eg:- 'IND', 'USA', 'TUN', etc.
        cameraView.setMRZCountryCodeList("all");
    }
    // Enable document liveness and set Document liveness url
    cameraView.enableDocLiveness(true)
            .setMaxTimeLimitInSeconds(60)
            .setServerUrl("Add your document liveness url")
    cameraView.setRecogType(recogType)
            .setView(linearLayout) // To add camera view
            .setCameraFacing(0) // // To set selfie(1) or rear(0) camera.
            .setOcrCallback(this)  // To get feedback and Success Call back
            .setStatusBarHeight(statusBarHeight)  // To remove Height from Camera View if status bar visible
            .setFrontSide() // or cameraView.setBackSide(); to scan card side front or back default it's scan front side first
//                Option setup
//                .setEnableMediaPlayer(false) // false to disable default sound and true to enable sound and default it is true
//                .setCustomMediaPlayer(MediaPlayer.create(this, /*custom sound file*/)) // To add your custom sound and Must have to enable media player
            .init();  // initialized camera
	// To set barcode formate.
	cameraView.setBarcodeFormat(int barcodeFormat); // access all type of BarcodeFormate from BarcodeFormat.java class
}

/**
 * To handle camera on window focus update
 * @param hasFocus
 */
@Override
public void onWindowFocusChanged(boolean hasFocus) {
    if (cameraView != null) {
        cameraView.onWindowFocusUpdate(hasFocus);
    }
}

@Override
protected void onResume() {
    super.onResume();
    cameraView.onResume();
}

@Override
protected void onPause() {
    cameraView.onPause();
    super.onPause();
}

@Override
protected void onDestroy() {
    cameraView.onDestroy();
    super.onDestroy();
}

/**
 * To update your border frame according to width and height
 * it's different for different card
 * Call {@link CameraView#startOcrScan(boolean isReset)} To start Camera Preview
 * @param width    border layout width
 * @param height   border layout height
 */
@Override
public void onUpdateLayout(int width, int height) {
    if (cameraView != null) cameraView.startOcrScan(false);

    //<editor-fold desc="To set camera overlay Frame">
    ViewGroup.LayoutParams layoutParams = borderFrame.getLayoutParams();
    layoutParams.width = width;
    layoutParams.height = height;
    borderFrame.setLayoutParams(layoutParams);

    ViewGroup.LayoutParams lpRight = viewRight.getLayoutParams();
    lpRight.height = height;
    viewRight.setLayoutParams(lpRight);

    ViewGroup.LayoutParams lpLeft = viewLeft.getLayoutParams();
    lpLeft.height = height;
    viewLeft.setLayoutParams(lpLeft);
    //</editor-fold>
}

/**
 * Override this method after scan complete to get data from document
 *
 * @param result is scanned card data
 *  result instance of {@link OcrData} if recog type is {@link com.docrecog.scan.RecogType#OCR}
 *              or {@link com.docrecog.scan.RecogType#DL_PLATE} or {@link com.docrecog.scan.RecogType#BARCODE}
 *  result instance of {@link RecogResult} if recog type is {@link com.docrecog.scan.RecogType#MRZ}
 *  result instance of {@link CardDetails} if recog type is {@link com.docrecog.scan.RecogType#BANKCARD}
 *  result instance of {@link PDF417Data} if recog type is {@link com.docrecog.scan.RecogType#PDF417}
 *
 */
@Override
public void onScannedComplete(Object result) {
    // display data on ui thread
    Log.e("TAG", "onScannedComplete: ");
    if (result != null) {
    	// make sure release camera view before open result screen
    	// if (cameraView != null) cameraView.release(true);
        // Do some code for display data

        if (result instanceof OcrData) {
            if (recogType == RecogType.OCR) {
                // @recogType is {@see com.docrecog.scan.RecogType#OCR}
                if (isBack || !cameraView.isBackSideAvailable()) { // To check card has back side or not
                    // To Access front/back document liveness status for ID cards
                    ((OcrData) result).getFrontData().docLiveness
                    ((OcrData) result).getBackData().docLiveness
            		OcrData.setOcrResult((OcrData) result); // Set data To retrieve it anywhere
                } else {
                    isBack = true;
                    cameraView.setBackSide(); // To recognize data from back side too.
                    cameraView.flipImage(imageFlip);
                }
            } else if (recogType == RecogType.DL_PLATE || recogType == RecogType.BARCODE) {
                // @recogType is {@link RecogType#DL_PLATE} or recogType == {@link RecogType#BARCODE}
            	OcrData.setOcrResult((OcrData) result); // Set data To retrieve it anywhere
            }
        } else if (result instanceof RecogResult) {
            // @recogType is {@see com.docrecog.scan.RecogType#MRZ}
            // To Access front/back document liveness status for MRZ Document
            ((RecogResult) result).docfrontliveness
            ((RecogResult) result).docbackliveness
            RecogResult.setRecogResult((RecogResult) result); // Set data To retrieve it anywhere
        } else if (result instanceof CardDetails) {
            //  @recogType is {@see com.docrecog.scan.RecogType#BANKCARD}
            CardDetails.setCardDetails((CardDetails) result); // Set data To retrieve it anywhere
        } else if (result instanceof PDF417Data) {
            //  @recogType is {@see com.docrecog.scan.RecogType#PDF417}
            if (isBack || !cameraView.isBackSideAvailable()) {
                PDF417Data.setPDF417Result((PDF417Data) result); // Set data To retrieve it anywhere
                sendDataToResultActivity(RecogType.PDF417);
            } else {
                isBack = true;
                cameraView.setBackSide(); // To recognize data from back side too.
                cameraView.flipImage(imageFlip);
            }
        }
    } else Toast.makeText(this, "Failed", Toast.LENGTH_SHORT).show();
}

/**
 * @param titleCode to display scan card message on top of border Frame
 *
 * @param errorMessage To display process message.
 *                null if message is not available
 * @param isFlip  true to set your customize animation for scan back card alert after complete front scan
 *                and also used cameraView.flipImage(ImageView) for default animation
 */
@Override
public void onProcessUpdate(int titleCode, String errorMessage, boolean isFlip) {
// make sure update view on ui thread
    runOnUiThread(new Runnable() {
        @Override
        public void run() {
            if (getTitleMessage(titleCode) != null) { // check
                Toast.makeText(context, getTitleMessage(titleCode), Toast.LENGTH_SHORT).show(); // display title
            }
            if (errorMessage != null) {
                Toast.makeText(context, getErrorMessage(errorMessage), Toast.LENGTH_SHORT).show(); // display message
            }
            if (isFlip) {
                // To set default animation or remove this line to set your custom animation after successfully scan front side.
                cameraView.flipImage(imageFlip);
            }
        }
    });
}

@Override
public void onAPIUpdate(int code, String message) {
   Runnable runnable = () -> {
       if (code == RecogEngine.ACCURA_API_DISPLAY_PROGRESS) {
           try {
               // show/hide your custom dialog according to message
               if (message.equals("Show") && !pd.isShowing()) {
                   // Show loader
               } else if (message.equals("Hide") && pd.isShowing()) {
                   // dismiss loader
               }
           } catch (Exception e) {
               e.printStackTrace();
           }
       } else if (code == RecogEngine.ACCURA_API_ERROR) {
           Toast.makeText(OcrActivity.this, "Api Error is " + message, Toast.LENGTH_LONG).show();
       }
   };
   runOnUiThread(runnable);
}

@Override
public void onError(String errorMessage) {
    // display data on ui thread
    // stop ocr if failed
    Toast.makeText(this, errorMessage, Toast.LENGTH_SHORT).show();
}

private String getTitleMessage(int titleCode) {
    if (titleCode < 0) return null;
    switch (titleCode){
        case RecogEngine.SCAN_TITLE_OCR_FRONT:// for front side ocr;
            return String.format("Scan Front Side of %s", cardName);
        case RecogEngine.SCAN_TITLE_OCR_BACK: // for back side ocr
            return String.format("Scan Back Side of %s", cardName);
        case RecogEngine.SCAN_TITLE_OCR: // only for single side ocr
            return String.format("Scan %s", cardName);
        case RecogEngine.SCAN_TITLE_MRZ_PDF417_FRONT:// for front side MRZ, PDF417 and BankCard
            if (recogType == RecogType.BANKCARD) {
                return "Scan Bank Card";
            } else if (recogType == RecogType.BARCODE) {
                return "Scan Barcode";
            } else
                return "Scan Front Side of Document";
        case RecogEngine.SCAN_TITLE_MRZ_PDF417_BACK: // for back side MRZ and PDF417
            return "Now Scan Back Side of Document";
        case RecogEngine.SCAN_TITLE_DLPLATE: // for DL plate
            return "Scan Number Plate";
        default:return "";
    }
}

private String getErrorMessage(String s) {
    switch (s) {
        case RecogEngine.ACCURA_ERROR_CODE_MOTION:
            return "Keep Document Steady";
        case RecogEngine.ACCURA_ERROR_CODE_DOCUMENT_IN_FRAME:
            return "Keep document in frame";
        case RecogEngine.ACCURA_ERROR_CODE_BRING_DOCUMENT_IN_FRAME:
            return "Bring card near to frame.";
        case RecogEngine.ACCURA_ERROR_CODE_PROCESSING:
            return "Processing...";
        case RecogEngine.ACCURA_ERROR_CODE_BLUR_DOCUMENT:
            return "Blur detect in document";
        case RecogEngine.ACCURA_ERROR_CODE_FACE_BLUR:
            return "Blur detected over face";
        case RecogEngine.ACCURA_ERROR_CODE_GLARE_DOCUMENT:
            return "Glare detect in document";
        case RecogEngine.ACCURA_ERROR_CODE_HOLOGRAM:
            return "Hologram Detected";
        case RecogEngine.ACCURA_ERROR_CODE_DARK_DOCUMENT:
            return "Low lighting detected";
        case RecogEngine.ACCURA_ERROR_CODE_PHOTO_COPY_DOCUMENT:
            return "Can not accept Photo Copy Document";
        case RecogEngine.ACCURA_ERROR_CODE_FACE:
            return "Face not detected";
        case RecogEngine.ACCURA_ERROR_CODE_MRZ:
            return "MRZ not detected";
        case RecogEngine.ACCURA_ERROR_CODE_PASSPORT_MRZ:
            return "Passport MRZ not detected";
        case RecogEngine.ACCURA_ERROR_CODE_ID_MRZ:
            return "ID card MRZ not detected";
        case RecogEngine.ACCURA_ERROR_CODE_VISA_MRZ:
            return "Visa MRZ not detected";
        case RecogEngine.ACCURA_ERROR_CODE_WRONG_SIDE:
            return "Scanning wrong side of document";
        case RecogEngine.ACCURA_ERROR_CODE_UPSIDE_DOWN_SIDE:
            return "Document is upside down. Place it properly";
        default:
            return s;
    }
}

// After getting result to restart scanning you have to set below code onActivityResult
// when you use startActivityForResult(Intent, RESULT_ACTIVITY_CODE) to open result activity.
@Override
protected void onActivityResult(int requestCode, int resultCode, @Nullable Intent data) {
    ...
    if (resultCode == RESULT_OK) {
        if (requestCode == RESULT_ACTIVITY_CODE) {
            Runtime.getRuntime().gc(); // To clear garbage
            //<editor-fold desc="Call CameraView#startOcrScan(true) to scan document again">

            if (cameraView != null) cameraView.startOcrScan(true);

            //</editor-fold>
        }
    }
}